Recently, there have been many fires in textile printing and dyeing factories. Be vigilant during the high fire season
“Great Heat” is here, the hot time of the year, and the cooking mode is also on. Recently, the high temperature in Shaoxing has been 40 degrees, and it has exceeded the 40 degree mark in some places. The weather is dry and dry, so be careful about the fire.
In recent days, there have been many fires in fabric printing and dyeing factories!
Keqiao District Fire Brigade:
At 15:56 on July 23, 2017, the Keqiao Brigade Command Center received an alarm saying that there was a fire in the Nanying Printing and Dyeing Factory located on Xingbin Road, Binhai, Keqiao District. The brigade immediately dispatched 3 fire trucks from the Binhai Squadron and 15 fire officers and soldiers to deal with it. At 16:12, the fire was under control and at 16:27, the fire was completely extinguished. Fortunately, no one was injured in the fire, and the cause of the fire is under further investigation.
On the afternoon of July 24: A fire broke out in a printing and dyeing factory on Tianshan 1st Road, Jimo
On July 24, at about 1 p.m., a fire broke out in a printing and dyeing factory located on Tianshan 1st Road, Jimo. After receiving the alarm, firefighters quickly arrived at the scene and tried their best to rescue the factory. Smoke billowed from the burning factory. As for the The cause of the fire is under investigation.
On the afternoon of July 23: A fire broke out in a private fabric factory in Xucun, Haining, Jiaxing
On the afternoon of July 23, a fire broke out in a private fabric factory near Nanlian Village in Xucun. The fire destroyed the fabrics and machinery in the factory, and the roof also collapsed. Currently, the fire damage and cause are under further investigation.
Summer is hot and dry, and there are many flammable materials and circuits in fabric printing and dyeing enterprises, which can easily cause fires. Therefore, fabric workers must do a good job in fire safety to avoid tragedies and unnecessary losses.
“Detailed Rules on Causes and Response Measures of Fires in Textile Enterprises”
Hope it can be helpful to everyone
1. Causes of fires in textile enterprises
According to statistics, there are different reasons for fires in fabric companies, including:
1. Fire caused by open flame
Common fires include improper use of electric welding, gas welding, blowtorches, electric furnaces, etc., fires caused by improper smoking, etc. This year, the proportion of improper electric welding ignition has increased.
2. Electrical short circuit fire
Cotton textile factories have a lot of electrical equipment, and long lines are prone to short circuits and fires. Especially if the wires and equipment are used for a long time, aging is more likely to occur.
3. The machine brakes and catches fire due to friction between parts
Machine rolling, winding, and constant friction due to lack of oil in the bearings cause heat and fire.
4. Fire caused by impact and collision of mechanical parts
For example, the frequency of sparks caused by thugs hitting metal objects and stones is also relatively high.
5. Fire caused by lightning strike
Fires often occur during lightning strikes if there is no lightning protection device or poor grounding.
6. Poor electrical contact causes sparks to catch fire
Common problems include poor contact of the orbital moving electrodes of the vehicle-mounted automatic doffing machine, causing sparks to ignite and cause fire hazards.
7. Static electricity fire
High-voltage static electricity caused by the accumulation of fibers and dust in the air can cause fires. It often occurs in workshops with concentrated dust, dust rooms and places where high-resistance antigen materials such as hemp and synthetic fibers are used, and the humidity in the workshop is too low. It is reported that several static electricity fires have occurred in Harbin Flax Factory.
2. Fire prevention</o:Mars detector (such as infrared sensor, etc.) fire protection device.
9. Develop fire handling procedures for each machine to prevent the spread of flames
(1) Generally, in the event of a fire, the power must be cut off and the surrounding flammable piles removed.
(2) After the fire is extinguished, the remaining fire must be inspected to prevent resurgence.
(3) If the fire in the spinning frame is large, the roving should be pulled off and the machine should be empty. If necessary, the roving should be removed, and debris and flammable objects near the fire should be removed. In case of fire, do not dismantle the suction box to prevent flames from being sucked into the main suction pipe.
(4) If the fire has been introduced into the suction main air duct to burn, the machine should be stopped immediately and drilled into the air duct to extinguish the fire.
(5) If a small area catches fire, you can use a yellow sand bucket or a water-soaked sandbag to extinguish the fire
(6) The spun yarn spindle belt falls into the drum joint and wraps around the drum or drum. The machine must be shut down and cleared immediately to prevent friction and fire.
(7) It is strictly forbidden to use water or foam fire extinguishers to extinguish fires caused by electrical equipment.
10. Do a good job in cleaning the workshop and machine
Reduce flying dust and clean the workshop, machine and surrounding environment to reduce flying dust and grease, prevent the accumulation of dust, and reduce the expansion of fire hazards.
11. Do daily maintenance of equipment
Do a good job in the daily maintenance of the machine, remove oil accumulation, rolling brakes and heat in the fabric spindles and bearings, and reduce the entanglement of fibers and yarns. Electrical equipment should be inspected periodically to prevent overuse and overload operation due to overheating and aging, and the use of normal current protectors.
AAAFSGRETEGSDFW
Disclaimer:
Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.
AA
