Detailed knowledge about anti-static fabrics and anti-static work clothes

Anti-static fabric is a functional fabric that has the ability to eliminate static electricity. During the weaving process, anti-static fabric is evenly mixed with conductive fibers and woven into the fabric. Conductive fiber refers to the general term for fibers made entirely or partially of conductive or sub-conductive materials using metal or organic materials. Its volume resistivity PV is between 104-109 ohms. Most of the protective clothing made of anti-static fabrics is made of special polyester filament/elastic yarn, with conductive fibers embedded in the warp or weft direction, and is woven with special techniques. Compared with protective clothing made of traditional anti-static agents, this kind of fabric not only has good dust-proof performance, but also has an anti-static effect that is several times enhanced. The conductive threads will not break. Due to its good dust-proof performance, it greatly reduces the number of cleanings. It is the fabric of choice for most anti-static protective clothing.

The nature and elimination mechanism of anti-static work clothes

Anti-static work clothes made by adding conductive fibers to chemical fiber fabrics do not produce dust or flakes, and are not easy to carry fine dust. The unique design also prevents the intrusion of dust. It is not easy to carry fine dust, and the unique design also prevents the intrusion of dust. Its electricity dissipation is based on two mechanisms: charge leakage and neutralization. When grounded, the static electricity on the fabric is not only neutralized by the corona discharge of the conductive fibers, but also discharged to the earth through the conductive fibers; when not grounded, the static electricity on the fabric is eliminated by the weak corona discharge of the conductive fibers. Practice has proven that anti-static work clothes can effectively suppress static electricity in work clothes and remove or reduce the harm of electrostatic discharge.

Use of anti-static clothing

Cleaning cycle: once a week

Service life: more than 50 times under normal use and professional cleaning

Note:

1. Avoid sharp metal edges scratching the fabric and causing damage to the fabric of the work clothes.

2. In order to reduce the dust generation and shielding properties of the fabric, our company adopts chain stitch sewing method to prevent sharp objects from hooking the sutures during use and cleaning to avoid needle stripping. And affect the use.

3. During dust-free cleaning, zippered clothing should be zipped up to reduce entanglement and avoid abnormal damage to the zipper.

4. When cleaning, use special protective tape for hook and loop fasteners to adhere them securely to avoid entanglement or mechanical damage to the work clothes fabric.

5. Avoid using a brush to avoid damaging the fabric.

How to clean anti-static fabrics

In the process of industrial production (such as electrical production, semiconductors, precision finishing, injection molding, pharmaceuticals, etc.), there are many potential sources of pollution in clean rooms. Among them, the biggest threat that is easily controlled is personnel pollution. , people will produce a large amount of dust particles during clean room activities, including: 1. Active dust particles: such as bacteria and yeast, etc.; 2. Inactive dust particles: such as hair, dander, etc.; 3. Chemical substances: such as sodium, Potassium, magnesium, etc. The most effective method at present is to take away dust particles through isolation and cleaning of clean room work clothes, so that pollutants are not spread into the clean room environment, so as to reduce the pollution of the clean room environment by personnel. The management of dust-free clothing systems occupies an important position in the pollution control of clean rooms. Under normal circumstances, clean and static-free work clothes are cleaned once a week. Some demanding environments require cleaning once a day, and you even need to change into clean dust-free clothes every time you enter the clean room. The finished fiber itself is a clean fiber that is difficult to stain, but how to keep it is an important factor, and that is the cleaning method. If you use general cleaning methods, of course, it will get dirty on the contrary. So extraordinary methods must be used. Clean work clothes, from the perspective of management, must also be cleaned and packaged in the clean room during cleaning. As an important means of pollution control, the cleanliness requirements of clean clothes are particularly high.

The following are particularly important points when cleaning

1. Before cleaning, check for scratches, damage, buckles and other accessories, and repair, replace or scrap those that are defective.

2. Cleaning, drying, and packaging must be carried out in a clean room that is higher than the clean room where work clothes are used.

3 The cleaning temperature should not exceed 40 degrees, and the drying temperature should not exceed 60 degrees

4. When rinsing and water-permeating, antistatic agents can be used to improve antistatic properties, but the antistatic agent selected should be well combined with the fibers and no dust will fall off.

5. Work clothes with buckles,��Clean in the closed state.

——Professional functional fabric supply and application comprehensive service provider. The company has strong scientific and technological research and development capabilities, advanced production and inspection methods, and has self-operated import and export rights. It is also an ISO9001-2008 and ISO4001-2004 certified enterprise. The main products include: antistatic series, high temperature resistant and fireproof series, fireproof series, oil and water repellent and three-proof series, acid and alkali resistant series, general workwear fabrics and accessories, etc. Involving metallurgy, fire protection, petroleum, chemical industry, machinery, medical and other industries. After decades of hard work, market-oriented, innovation-driven, quality-based survival, we have developed and grown. Technology provides you with a full range of solutions and complete products and services.

——Professional functional fabric supply and application comprehensive service provider. The company has strong scientific and technological research and development capabilities, advanced production and inspection methods, and has self-operated import and export rights. It is also an ISO9001-2008 and ISO4001-2004 certified enterprise. The main products include: antistatic series, high temperature resistant and fireproof series, fireproof series, oil and water repellent and three-proof series, acid and alkali resistant series, general workwear fabrics and accessories, etc. Involving metallurgy, fire protection, petroleum, chemical industry, machinery, medical and other industries. After decades of hard work, market-oriented, innovation-driven, quality-based survival, we have developed and grown. Technology provides you with a full range of solutions and complete products and services.

AAA4353466DG

Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA