Work clothes are also called manufacturers, but they are just two different names. When it comes to the word “factory uniform”, what everyone thinks of is the name of southerners, especially in Guangdong, where everyone’s common name is “factory uniform”. Customized factory uniforms are clothing that every factory must be equipped with. The design of factory uniforms must be combined with the needs of the customer and based on occupational characteristics, corporate culture, body shape characteristics, etc. Cleaning factory clothes also requires some methods. Let’s learn about the methods for cleaning factory clothes?
So, what are the methods for cleaning factory clothes?
1. Wiping method
The wiping method is to use a towel soaked in dry cleaning agent to wipe off the dirt on the clothes, so that the dirt is dissolved by the dry cleaning agent and adheres to the towel. When wiping, wash the towel in dry cleaning agent while wiping. The dirt on the clothes will eventually be dissolved in the washing solution through the towel, so as to achieve the purpose of cleaning and decontamination.
2. Flushing method
For heavily polluted clothes or severely polluted parts of the clothes, you can use a soft brush dipped in dry cleaning agent to clean them. Don’t use too much force when rinsing, and use even force. Rinse method is an important method in manual dry cleaning.
3. Soaking method
For some woolen clothes with loose structure, in order to prevent them from being deformed, you can put the clothes into a dry cleaning solution and wash them by lifting them with both hands. This method is suitable for more expensive clothes. This method has a great impact on the detergent. The loss is huge. After the clothes are washed, the used dry cleaning agent solution should be put into a closed container. After sedimentation, the dirt will be separated and it can continue to be used.
4. Pre-stain removal
Before manual dry cleaning, dust on the surface of the clothes must be removed first. For local heavy stains, use perchlorethylene and stain remover to remove them. In particular, water-soluble stains should be removed with detergent or alcohol soap. Dry cleaning can only be done after water-soluble stains have been removed from the work clothes.
5. Selection of dry cleaning agents
When dry cleaning clothes by hand, the dry cleaning agent is difficult to recycle and is very wasteful. From an economic point of view, except for the use of tetrachlorethylene in individual cases, most of them use cheap 120# solvent gasoline or high-content alcohol. In addition, these two solvents are less toxic than perchlorethylene and evaporate quickly. But both solvents are flammable substances. It must be operated without fire, and fire prevention must be paid attention to to avoid losses caused by fire.
The above is the relevant introduction to the knowledge about cleaning factory clothes. I hope it can help everyone. Guerlain custom clothing manufacturer reminds everyone that cleaning factory clothes should be carried out according to different fabrics, so that the relevant maintenance work can be done well, so that the factory clothes will not be damaged. functions are affected and compromised.
Tag: factory uniform cleaning
