At the end of the year, there are some signs of peak season in the textile market, and news of dyeing factories getting stuck and queuing up are endless. However, there is something special about this “peak season”. It is different from the previous top-down improvements in the textile industry chain, but is limited to printing and dyeing factories. All the news about good market conditions basically comes from dyeing factories, while factories in other links, especially gray cloth weaving companies, are either cutting prices or selling goods at low prices, and many gray cloth factories have already Putting the Spring Festival holiday on the agenda.
The inclined pipes are jammed and lined up, and the steam vats and flat vats have green passage
It is well known that the condition of dyeing factories is better than that of other links in the textile industry chain. But even in the same dyeing factory, there is a phenomenon of “unequal hot and cold” between different dye vats.
The staff of an old dyeing factory in Wujiang area reported to the editor that their factory has been very busy in the past half month. Even when the blanks enter the warehouse, they have to queue up to unload them, let alone the dye vat. It is common to queue for seven days to press the card. However, with the reduction of T400 orders in recent days, production in the factory has become a little easier, but it still takes about 5 days to press the jam. However, these press cards are only limited to orders operated on inclined tubes, while orders on steam cylinders do not require press cards. As long as the order comes in, it can be done immediately.
It is understood that this dyeing factory has about 60 inclined tube dyeing vats and about 15 steaming vats. The smaller number of steaming cylinders is more leisurely than the several times more inclined tubes, which is difficult to understand.
A similar situation has occurred in another dyeing factory. The inclined tube workshop with 40 inclined tube dye vats currently needs 1-3 days to process orders, while the inclined tube workshop with 30 However, the flat cylinder workshop for flat cylinders basically does not need to press cards, and it is normal to confirm the color at will. It also has a small quantity of dye vats, but it is not as crowded with orders as there are a large number of dye vats.
However, these relatively “leisurely” steam vats and flat vats are not like this every year. In previous years, this time was the busiest time for these two types of dye vats, and queues for pressing cards were indispensable at that time. them.
DyeThe busyness of the vats is uneven, reflecting the different sales of products
Different dye vats have different order popularity. In fact, in the final analysis, the sales level of the products is changing. If you understand some of the varieties commonly made by various dyeing factories, you can understand why this situation occurs.
The steam cylinder is mainly used for the production and processing of imitation silk. The flat cylinder is mainly used for polyester taffeta, nylon, etc. The inclined tube is widely used for imitation silk, imitation memory, T400, four-sided elastic, etc. Can be processed. The performance of these corresponding products this year is basically consistent with the busyness of the dye vats.
Many simulated silk manufacturers are already on the road to selling goods. Because imitation silk products are suitable for women’s clothing, they have been the darling of the clothing industry all year round. Conventional varieties have continued to flourish. Products such as chiffon and tangled hemp have long been veterans of the fabric industry. Even though they are so “old”, they have not affected its popularity at all. Bestseller. Normally, gray fabric factories stock hundreds of thousands or millions of meters of goods without worrying about selling them. However, this year, the demand for artificial silk has shrunk, and all these goods have been turned into inventory.
Manufacturers such as polyester taffeta and nylon taffeta are no longer just selling goods. Many companies have begun to transform and no longer produce such products that are almost forgotten by the market. A gray fabric factory in Wujiang has 300 looms. Polyester taffeta products have always been “hard currency” in the past, but this year’s situation forced them to transform. At present, 190T, 210T and other common polyester taffeta in the market are no longer produced. After all, these specifications are facing competition not only in Jiangsu and Zhejiang, but also in Hubei, Anhui, Northern Jiangsu and other places where the price advantage of fabrics is more obvious. They began to produce some varieties with higher density, such as 380T and 400T, and tried to avoid specifications with greater competitive pressure.
The performance of the T400 and four-sided bombs made on the inclined tube this year is obvious to everyone. T400 has forced many dyeing factories to become “T400 specialty factories”, while four-sided elastic has allowed many dyeing factories to escape the off-season. So it’s no surprise that there are queues on the inclined tube.
Compared with the “unequal hot and cold” on the large tank, the situation on the small tank is more worrying. According to a staff member of a dyeing factory, there are also queues for pressing in small vats in the factory. The pressing time is not long, usually around 1-2. However, card pressing is also targeted, mainly for products such as T400, imitation memory, four-sided elastic, etc. Products such as imitation silk will still not be pressed. On the one hand, because the process of such products is longer, card pressing will be delayed. Production, of course, the more important thing is that this product does not have many small tanks, so it is not worth pressing.
The situation of small tanks is actually a trend prediction. The hot sales of products on the market next year will be roughly the same as this year.If the difference is too big, those good products will continue to be good, while those with poor products may be worse off. </p
