The process flow of weaving cotton fabric
Cotton fabric is composed of warp and weft, so it should be spun before weaving. The production process of warp and weft is different. The specific steps are as follows
(1) Winding: Use the yarn clearer to remove harmful defects on the surface of the spinning yarn. , winding into cheese yarn with large capacity, good shape and quality that meets the requirements. (2) Warping: Integrate a certain number of warp yarns into sheet yarns, and wind them neatly and parallelly on the moving warp beam according to a certain length. (3) Sizing: Combine the warp yarns on several warping beams into one piece, immerse it in slurry, and dry it so that the slurry immerses and covers the spinning yarn to increase the strength and hairiness of the spinning yarn. To adapt to weaving production. (4) Direct weft yarn: The yarn spun by the spinning machine is wound on the weft tube: directly used for weaving small products. (5) Indirect weft yarn: The thin yarn is wound into a cheese yarn, and the warp and weft are woven into a bobbin for weaving production. (6) Twist setting: In order to prevent weft shrinkage defects, the weft yarn is usually twisted by heat and moisture, and then used after the twist is stable. (7) Weaving: The process of weaving warp and weft yarns into fabrics of different styles using different looms, adopting different structures and machine parameters.
AAASVSGHRUTO
Extendedreading:https://www.alltextile.cn/product/product-5-373.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
ExtendedReading:
Extendedreading:
Extendedread
