Common terms used in textile flame retardant testing



Commonly used terms in textile flame retardant testing The following fire protection terminology often appears in the fire protection testing of fabrics, and the chemical industry …

Commonly used terms in textile flame retardant testing

The following fire protection terminology often appears in the fire protection testing of fabrics, and the chemical industry is summarized as follows:

(1)Combustion: When flammable substances leave the fire source, the oxidation and exothermic reaction occurs, accompanied by the phenomenon of burning out the flameless and flameless combustion zones.

(2)Burning: When a flammable substance comes into contact with a fire source, it is a flameless burning process in a solid state, accompanied by the phenomenon of exhaustion of the burning zone.

(3)Afterburning: After the burning material leaves the fire source, it still continues to burn with flames.

(4)Smoldering: After the ignited material leaves the fire source, there is still continuous flameless combustion.

(5)Flaming combustion: A gas phase combustion phenomenon accompanied by exhaustion.

(6)Smoke burning: A slow burning phenomenon that is endlessly visible, usually with smoke.

(7)Ignition temperature: Under specified test conditions, the low temperature at which the material begins to continue burning is usually called the ignition point.

(8)Pyrolysis: The irreversible chemical decomposition of materials at high temperatures without oxidation.

(9)Melting droplets: High-temperature melting drippings of materials.

(10)Carbonization: The process of forming carbonaceous residue during pyrolysis or incomplete combustion of materials.

(11)Fireproof: The property of a certain material to prevent, slow down or terminate flammable combustion.

(12)Flame spread: The expansion process of the flame front.

(13)Damage length: Under the specified test conditions, the maximum length of the material damage area in the specified direction, usually also called the char length.

(14)Limiting Oxygen Index (L0I): Under specified test conditions, the low concentration of oxygen in the nitrogen-oxygen mixture required to keep the material in a burning state.

AAASDFWETGD


Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.

AA

This article is from the Internet, does not represent 【www.china-garment.com】 position, reproduced please specify the source.https://www.china-garment.com/archives/34371

Author: clsrich

 
TOP
Home
News
Product
Application
Search