10 tips to help you choose high-quality anti-static fabrics

As a kind of functional protective clothing, anti-static work clothes have the same service life as general work clothes. Whether it is due to quality issues with the anti-static fabric or irregular use, the conductive performance of the anti-static workwear will be relatively reduced after a period of time, thus affecting work safety. Let’s teach you how to choose high-quality anti-static fabric.

1. Under normal circumstances, in places where explosive gas mixtures appear continuously, frequently in short periods of time or exist for long periods of time, and in places where explosive gas mixtures may appear, the minimum ignition energy of flammability is 0.25 When mJ is below 1, anti-static clothing should be worn. For anti-static fabrics, gray conductive fiber is of high quality. In terms of the appearance quality of the anti-static work clothes selected, the fabric should be free of damage, spots, dirt or other defects that affect the anti-static performance of the fabric.

2. All work clothes should use anti-static fabrics. Generally, no lining is used. When a lining must be used, the exposed area of the lining should not exceed 20% of the inner area of the entire work clothes. If it is needed for a large area, The folder should be lined with a lining woven with the same conductive fiber, which can generally be distinguished by the naked eye.

3. According to the electrostatic sensitivity of different finishing objects in different places, choose anti-static work clothes with different grades of anti-static fabrics. The smaller the distance between conductive fibers, the better the effect. The better the Ruth obvious effect. The good ones are the kind that intersect with each other.

4. It is strictly prohibited to attach or wear any metal objects on the anti-static work clothes. If there are metal buttons, zippers and other metal objects on the anti-static work clothes, then trust me, this is definitely not a qualified piece. Wear static-removing work clothes.

5. The fabric should be flat and have a good hand feel. Cotton with a good hand feel has a relatively high content. The higher the polyester content, the easier it is to generate static electricity.

6. Check whether the manufacturer is qualified to produce anti-static fabrics, anti-static work clothes, or functional fabrics. Check the manufacturer’s production license. If there are any problems, you must not choose this manufacturer.

7. When purchasing anti-static fabrics, it comes with donning and unloading methods, as well as documents such as quality assurance. Pay special attention to the manufacturer’s name, address, contact information, etc. As functional protective clothing, its after-sales service It’s only worthy of attention.

8. A few pieces of anti-static workwear purchased in batches should be randomly selected to test the charge level before wearing them. Those below 0.6 are considered qualified. After wearing for a certain period of time, especially when the wearer feels an electric shock when taking off his clothes, a retest is required.

9. When choosing conductive metal fiber cloth, you should choose a fabric with very fine metal fiber, because the finer the metal wire, the lower the voltage at which corona discharge starts, about 3- It can be discharged at about 4KV, and the effect of eliminating static electricity will be more obvious.

10. When using antistatic agent to treat polyester and polycotton cloth, its effect is very poor when the humidity is not high, and its antistatic durability is not as good as that of conductive metal wire cloth. So if there is an anti-static cloth after finishing, and an anti-static cloth with conductive yarn woven into it. Definitely choose the latter.

After talking about this, I believe everyone must have a preliminary understanding of how to choose anti-static fabrics. As for how to choose satisfactory fabrics, you should also choose based on your daily accumulated experience and complete testing plans. .

——Professional functional fabric supply and application comprehensive service provider. The company has strong scientific and technological research and development capabilities, advanced production and inspection methods, and has self-operated import and export rights. It is also an ISO9001-2008 and ISO4001-2004 certified enterprise. The main products include: antistatic series, high temperature resistant and fireproof series, fireproof series, oil and water repellent and three-proof series, acid and alkali resistant series, general workwear fabrics and accessories, etc. Involving metallurgy, fire protection, petroleum, chemical industry, machinery, medical and other industries. After decades of hard work, market-oriented, innovation-driven, quality-based survival, we have developed and grown. Technology provides you with a full range of solutions and complete products and services.

AAAWQ32RDRGFJ

Disclaimer:

Disclaimer: Some of the texts, pictures, audios, and videos of some articles published on this site are from the Internet and do not represent the views of this site. The copyrights belong to the original authors. If you find that the information reproduced on this website infringes upon your rights, please contact us and we will change or delete it as soon as possible.